Farsoon TechnologiesMetal 3D printers (LPBF)

Farsoon FS273M

Medium-frame industrial metal 3D printer (LPBF)

The FS273M is the next generation of the FS271M: a medium-frame metal LPBF system with a 275 × 275 × 355 mm build volume. It is available with one (1×500 W) or two (2×500 W) lasers for production of larger parts.

275x275x355 mmBuild Volume

Metal LPBFTechnology

2200 kgWeight

0.02~0.1 mm ( 0.0008-0.0039 in )Layer Thickness

Message on WhatsApp

Delivery and installation in YerevanMaintenance and repairAdvice on choosing the technology

Overview

The FS273M is designed to address productivity, cost-efficiency and industrial workflow in metal additive manufacturing. It is offered with one 500 W laser (FS273M) or two 500 W lasers (FS273M-2) and processes a wide range of industrial metal powders, from stainless and tool steels to aluminium, titanium, copper, nickel alloys, tantalum and tungsten.

According to Farsoon, the dual-laser scanning strategy and calibration algorithms increase the build volume rate by up to 2 times compared with the single-laser configuration. A new recoater design and enhanced signal control support stable powder delivery throughout the build.

The workflow is built around an integrated sealed glove box, a reactive-material-capable recirculating filter system, a shared material container and a sieving unit. Key machine parameters are open to the user.

Key features

Build volume 275 × 275 × 355 mm, layer thickness 0.02–0.1 mm
1×500 W (FS273M) or 2×500 W (FS273M-2) lasers, scanning speed up to 15.2 m/s
Dual-laser mode: up to 2× higher build rate (manufacturer data)
Integrated sealed glove box with tool access for safe part breakout
Reactive-material-capable recirculating filtration with long filter life
Open parameters, real-time modification, BuildStar and MakeStar® software

Technical specifications

BrandFarsoon Technologies

Build Volume275x275x355 mm

TechnologyMetal LPBF

Dimensions2315×1650×2105mm

Weight2200 kg

Layer Thickness0.02~0.1 mm ( 0.0008-0.0039 in )

Laser TypeDual Lasers, 2×500W (FS273M-2), Single Laser, 1×500W (FS273M)

ScannerF theta lenses or dynamic focusing system

Scanning SpeedMax. 15.2 m/s ( 49.9 ft/s )

File FormatSTL

SoftwareBuildStar, MakeStar®

Operating system64 bit Windows 10

Materials316L, 420, AlMgScZr, AlSi10Mg, AlSi7Mg, CuCrZr, H13, HX, IN718, Maraging Steel Grade 300, Pure Copper, Ta, TA15, Ti6Al4V, W

Key Software FeaturesOpen machine key parameters, real-time build parameter modification, three-dimensional
visualization, diagnostic functions

Printing MaterialsMetal Powders

Power SupplyEUR/China: 400V±10%, 3~/N/PE, 50Hz, 15A US: transformer sold with machine

Operating Ambient Temperature22-28°C (71.6-82.4℉)

Inert Gas ProtectionArgon/Nitrogen

Average Inert Gas Consumption in Process3-5 L / min

Applications

Molds and tooling with conformal cooling channels (420 and 316L stainless steel)

Medical implants with porous structures (tantalum)

Automotive structural parts, such as a lightweight titanium suspension upright

Series production of larger metal parts

With 3D Print

Delivery and installation in Yerevan
On-site start-up
Maintenance and repair in Armenia
Advice on your task

Frequently asked questions

What is the difference between the FS273M and the FS273M-2?

The FS273M has one 500 W laser and the FS273M-2 has two 500 W lasers. According to Farsoon, the dual-laser configuration increases the build volume rate by up to 2 times.

Which materials can the FS273M process?

316L, 420, AlMgScZr, AlSi10Mg, AlSi7Mg, CuCrZr, H13, HX, IN718, Maraging Steel Grade 300, pure copper, Ta, TA15, Ti6Al4V and W. The parameters are open, so users can develop their own process settings.

Which inert gas does it require?

Argon or nitrogen, with an average consumption of 3–5 L/min during the process.